KyrosWorks ยท Houston automation guide
Quote faster from your phone: a quote generator for trades and fab shops
You quote with your hands full, and the customer calls the next shop while you finish. Here is how a phone quote generator works for trades and fab shops.
If you run a trade or a fab shop, you quote with your hands full. You are under a sink, on a roof, or inside a panel when the next request comes in. The reply waits until the end of the day, and by then the customer has called the next company on the list.
A quote generator for contractors fixes that one gap. This guide explains how it works, what the owner does, what the customer receives, and where it should stop and hand the job back to a person.
Key takeaways
- A slow callback loses jobs. A customer who asks several shops for a price often goes with the first one that answers with a number.
- A good phone quote takes five questions and about two minutes. The customer gets a priced PDF.
- The price comes from your own rate card, applied the same way every time. It is not a guess.
- Jobs that cannot be priced from a description are not quoted. The tool books a site visit instead.
- It works for welding, HVAC, plumbing, electrical, and fab shops. Only the questions and the rate card change.
What a slow callback costs
A customer with a broken gate, a dead outlet, or a leaking water heater does not wait politely. They search, they call or text two or three companies, and they take the first useful answer. "Useful" means a price and a time, not "I will get back to you."
You cannot see this loss. A job you never got does not show up in the books. It shows up as a missed text that you answered at 7 p.m., after the customer had already booked someone else.
The usual fix is an office person, which costs a salary, or quoting from memory, which gives uneven prices. You underprice the job you rushed and overprice the one you were unsure about.
A quote generator is the smaller fix. It does not replace your judgment. It puts your judgment in a form that runs in two minutes, from your phone, wherever you are standing.
The five-question phone quote, step by step
The questions depend on the trade, but the shape is always the same. Here is what a welder or fabricator might answer:
- What is the job? A short description, in your words or the customer's. "Replace a cracked hitch on a utility trailer."
- What material is it? Steel, stainless, aluminum, or "not sure."
- How big is it? Linear feet of weld, number of parts, or a size band: small, medium, large.
- Where is it? The address or zip code. This sets the trip charge.
- When does the customer need it? Same day, this week, or flexible.
You answer on your phone, with one thumb, between tasks. You can tap most of the answers. Only the first one needs typing, and if the customer sent a photo or a text, you can paste it in.
Here is where the computer helps. The short description in question one is free text, and a program that reads language can sort it into the categories your rate card uses. That is the only place AI is involved. It reads the description and proposes categories, and you see them on screen before the quote goes anywhere. The pricing itself does not use AI.
Then you tap one button. The quote is built, and the customer receives it in about two minutes from when you started.
Where the price comes from
This is the part owners are most wary of, and they are right to be. A tool that invents prices is worse than no tool.
The price in a good quote generator comes from your own rate card. At the first meeting we write it down with you:
- Your labor rate, and whether it differs by trade process or by crew.
- Your minimum charge for showing up.
- Your trip charge, by distance or by zip code.
- Your markup on materials, and how you handle a customer who supplies their own.
- Your rush or after-hours surcharge.
- Anything you always add: permits, disposal, equipment rental.
The tool then does arithmetic. Labor plus materials plus trip plus surcharges. The same job, entered twice, gives the same number twice. You can read the line items on screen and change any of them before you send.
If a figure is missing from your rate card, the tool does not fill the gap with a guess. It stops and asks you. Over a few weeks the rate card gets more complete, and fewer questions come back.
The rate card is your pricing knowledge. It belongs to you, and it does not go into anyone else's build.
The PDF the customer gets
The customer receives a one-page PDF, not a text with a number in it. A PDF looks like a real quote, because it is one. It carries:
- Your company name, phone number, and license number where the trade requires one.
- The job description in plain words, so the customer can see you understood it.
- Line items: labor, materials, trip charge, and any surcharge.
- The total, and how long the price holds.
- A short line on what is not included.
- One way to say yes: reply, tap a link, or call.
The customer can compare it with another shop's quote and see what yours includes. You also have a written record of what you offered.
The job list you see from the truck
Every quote you send becomes a line on one list. You can open it on your phone from the truck.
Each line shows the customer, the job, the quote amount, the date sent, and a status: sent, viewed, accepted, scheduled, done. The list also shows which quotes have had no answer for two days, so you know whom to nudge.
That follow-up can be automatic. A short message goes to the customer on the schedule you set, such as one day and four days after the quote. You approve the wording once. If the customer has already said yes, no message goes out.
This list replaces the pile of texts, voicemails, and sticky notes where jobs go missing.
When a job needs a site visit
Some jobs cannot be priced from a description. A water heater in a tight attic. A panel upgrade in a house with old wiring. A duct run that depends on what is behind the wall. A fabrication job with no drawing.
A good tool knows its limits, and you set them. Before the tool goes live, you list the kinds of requests that need eyes on the job. When a request matches one of them, the tool does not print a price.
Instead, it does three things:
- It tells the customer plainly that this job needs a visit before a firm price.
- It offers slots from your real calendar, with drive time between jobs, so it does not book you across town at 2 p.m. and again at 2:30.
- It puts the job on your list marked "site visit," with the customer's description and photos attached.
The result is that you never send a number you would regret, and the customer still hears back the same day.
How it fits your trade
The structure is the same in every trade. The questions and the rate card change.
- Welding and fabrication. Process (MIG, TIG, stick), material, size or part count, and whether the customer supplies material. Fab shops add quantity breaks and a drawing upload.
- HVAC. System type, age, the symptom, and tonnage if known. Repairs and diagnostics are quoted from a rate card. Replacements usually trigger a site visit.
- Plumbing. Fixture or line, accessible or not, and emergency or scheduled. Standard repairs get a price. Slab leaks and re-pipes get a visit.
- Electrical. Circuit or fixture work, panel size, and whether a permit is needed. Small jobs get a price. Panel and service work get a visit.
- Fab and machine shops. Part description, material, quantity, tolerance, and lead time. A repeat part can be quoted from a past price in seconds. A new part goes to you for review.
In each case the rule is the same: the tool prices what you have already priced a hundred times, and hands you what is new.
A real example: Heights Mobile Welding
Heights Mobile Welding is a small mobile welding service in the Houston Heights. It does gate and fence repair, trailer repair, and small custom brackets, within a short drive of the 77008 zip code.
KyrosWorks built it a public website, a quote calculator, and a playbook for how to run the business, in two days. You can see the site at heights-welding.pages.dev.
The site is built around one idea: a customer texts a photo and gets a price. The quote calculator behind it keeps the shop's rates in one place, so a price does not depend on who is answering or how tired they are. The playbook records how the business works, so the next decision does not start from nothing.
This is a small shop, and a five-person HVAC company would need a larger tool. The pattern is the same. The questions get longer and the rate card gets bigger.
What it costs to have one built
KyrosWorks sells this as three fixed-price items, with no hourly rate and no timesheet.
- The Plan, $750. I walk your operation with you, list the ten most repeated tasks, time them, and rank them. You get a one-page plan. If quoting is the biggest drain, the plan says so and says what the fix costs.
- The Build, from $4,000. One workflow built and installed on your own phone and accounts. For quoting, that is the five questions, your rate card, the PDF, the job list, and the site-visit rule. You also get a one-page guide for the people who use it and thirty days of fixes. Half is due on signing and half when you have used it once.
- Care, from $1,000 a month. I keep the tool running, fix what breaks, and make one small change a month. You can cancel any month in writing.
You own the tool and your data. Scope and price go in a one-page statement of work before any work starts. Two to three weeks is typical.
If you want to see the numbers for your shop, the first step is the Plan.
Want this built for your shop?
One workflow, built on your own phone and accounts, at a fixed price agreed in writing before work starts.
See what a fixed-price build costs →Questions owners ask
What is a quote generator for contractors?
It is a tool that turns a few facts about a job into a priced quote. The owner answers a short set of questions on a phone, the tool applies the owner's own rates, and the customer receives a PDF. The owner still decides what goes out.
Does the tool guess my prices?
No. The price comes from your own rate card: your hourly rate, your minimum charge, your materials markup, your trip charge. The tool does the arithmetic the same way every time. If a number is missing from your rate card, the tool asks you instead of making one up.
What happens when a job needs a site visit?
You decide in advance which kinds of jobs cannot be priced from a description. When a request matches one, the tool does not quote. It offers the customer a visit slot from your real calendar and puts the job on your list marked as a visit.
Will it work for HVAC, plumbing, electrical, welding, and fabrication?
Yes. The five questions change by trade, and so does the rate card. A plumber prices by fixture and trip, a welder by process and material, a fab shop by part, quantity, and material. The structure is the same.
How much does a quote tool cost in Houston?
KyrosWorks sells it as a fixed-price Build, agreed in writing before work starts, with half due on signing and half when you have used it once. You can start with the Plan, a one-page document that says whether the quote tool is the right first fix. The prices are listed in the section above.
← Back to AI automation for Houston companies